Picture 7


View 1 of the almost finished model. The quarter panel was also made using this method. Several were made fo the hood and quarterpanel. Then two were matched up. Note this was done before I cut the quarter panel off the kit. Unfortunately due to the lighting the dents in the hood can't be easily seen. The quarterpanel looks good though. It should also be noted that the side emblem was first cast separately before the quarterpanel was made. It wasn't possible to do it in one run (although I tried)

Return to Home Page http://www.interlog.com/~ask

Send comments, suggestions etc. to ask@interlog.com
Racing Car Exhuast Systems