|

Here are some of my completed motorcycle projects and projects still
on the workbench. In addition to pictures, you will find a detailed
construction diary for each model. I've organized the models by
manufacturer since most individuals have their preferred manufacturer.
What to use for display cases?
I've been looking for a long time for suitable
display cases to protect my models. I found a couple of great audio CD
cabinets at IKEA.
One called the KRYSS cabinet and the other the BERTBY. I picked up four
black KRYSS cabinets since it can hold twenty to twenty-five 1:12
models on it's five shelves. If you don't have an IKEA store near you,
check out audio storage cabinets in your local furnishing stores.
Note: The KRYSS and BERTBY cabinets are no longer
available at IKEA. However in their 2004 Catalogue, there is a smaller
wall mount unit called JÄRNA (W49xD17xH49cm) on page 98.
It looks like it could hold 12 or more 1:12 bikes. It has glass shelves
and sliding glass doors. The unit will hold 126 CDs (42 per shelf) so
that'll give you an idea of its capacity. As a bonus, only $35Cdn!! The
KRYSS units cost me $99Cdn. 
|
 |


Recently Completed
Honda
Z50J-III Gorilla
Honda's 'cute' little 50cc mini bike. Most North
America's are probably
remember seeing this when back in the '70s. However, the Gorilla (and
Z50J-I
Monkey) are still sold in Japan. |
 |
German Military Bicycle
Bicycles were used extensively by the Germans
in WWII. |
|
V-Max
(Export) '90
Yamaha's cruiser has a brute of an engine, 1200cc,
wrapped with an
equally muscular looking frame and bodywork. |
 |
XLR
250R J.G.S.D.F. Motorcycle Reconnaissance
In 1975, the Japan Ground Self Defense Force
(J.G.S.D.F.) began to
employ the
Honda XLR 250R off-road motorcycle for reconnaissance use. |
|
XV-1600
RoadStar '99
Yamaha Motor Corporation calls the RoadStar "The
ultimate
streetfighter of the big-displacement cruiser class" |
 |

Non-Motorcycle Projects
Although my site is dedicated to motorcycle modelling, I am also
interested
it other subject since my tastes are quite eclectic. For those who are
like
mined, here are some of my other models.
VW Schwimmwagen
October 29, 2002
I built the Schwimmwagen back in 2001 and always
planned to build a base for it. However, I kept procrastinating since
the only base I had done was for the 1:16 Kübelwagen. Although
pleased with the asphalt driveway, I was not very satisfied with the
look of the grass and gravel. So, that made me
hesitant to dry a 1:35 base for the Schwimmwagen. Especially when water
would be
involved.
I recently got the incentive I needed with an upcoming contest. I
figured the only hope of finishing something to enter, was to finally
build the base for the Schwimmwagen.
VW Kübelwagen
December 07, 2002
Its
been a while since I've worked on a motorcycle kit. I've spent a lot of
time
working on super detailing Tamiya's 1:16 Kübelwagen and have
finally finished.
This project allowed me to experiment with a lot of painting and
metal
working techniques that I think will prove useful on my future
motorcycle
projects.
|